Lunar Environment Structural Test Rig (LESTR)
Mechanical and Fluid Systems
Lunar Environment Structural Test Rig (LESTR) (LEW-TOPS-197)
A Low-Temperature Shape-Memory Alloy Mechanical Cyclical Testing Apparatus
Overview
The rapid acceleration of space exploration has created an increased demand for space environment testing of metal materials. All materials being used to manufacture flight hardware, electronics, and other products for government and commercial space require controlled replication of extreme temperature and vacuum conditions around mechanically loaded specimens to generate data that reflects in-service behavior.
Developed at Glenn Research Center, the Lunar Environment Structural Test Rig (LESTR) introduces a dry, cryogen-free approach to environmental testing that brings lunar-relevant cryogenic-vacuum testing into ordinary labs by integrating with existing universal testing machines. This technology was developed for Glenn researchers to evaluate materials and shape memory alloy mechanisms used in lunar mobility. LESTR simulates environments with vacuum and very low temperatures, such as permanently shadowed lunar regions. It addresses long-standing problems of conventional environmental testing methods by removing consumable cryogens and their associated logistics, improving safety, and overcoming the limitations of air/gas cooling that cannot achieve vacuum or the coldest required setpoints. The result is a practical path to representative, mission-relevant structural data under extended cyclic conditions, helping teams reduce operational burden and make faster, more confident qualification decisions for cold environment applications.
The Technology
LESTR is a unique mechanical test rig that doesn’t use cryogenic fluids to chill the materials, flight hardware, or electronics during testing. Instead, it uses a high powered refrigerator called a cryocooler to remove heat in a completely dry vacuum. This makes LESTR safer and more affordable than traditional methods for testing at temperatures as low as 40 Kelvin, or about -388 degrees Fahrenheit.
LESTR encloses standard tensile and four-point bending fixtures inside a high-vacuum chamber and mates with commercial universal testing machines for stress- or strain-controlled cyclic evaluation. Using off the shelf components makes it more affordable and easier to run, and it allows larger samples with a high-power camera for pre-marked samples. Inside the chamber, a closed cycle cryocooler couples to the load train through flexible thermal straps with integrated heaters, allowing operators to adjust the temperature to cryogenic setpoints without liquid cryogens. Dedicated optical access supports non-contact strain measurement (e.g., digital image correlation), enabling high-fidelity tracking of deformation and functional stability across long cyclic runs.
The concept of operations uses a roughing pump to achieve soft vacuum followed by a turbo pump for hard vacuum. A pressure transducer is used for pump-down, and the cryocooler then lifts heat from the load train and cold box through the thermal straps to the cold head, establishing stable low-temperature, high-vacuum conditions. Loads are applied through the load head and fixtures, measured at the load cell, and grounded through the static base, while electrical feedthroughs carry heater power and sensor signals. LESTR provides a unique, true dry cryogenic mechanical test environment with adjustable temperature, long-duration cyclic capability, and vacuum integrity that mirrors relevant lunar conditions. Because it integrates with existing test frames and eliminates consumables, LESTR simplifies operations, enhances safety, and delivers more representative structural data for cold-environment mechanisms and materials, accelerating qualification with synchronized thermo-mechanical profiles. This technology is assessed at Technology Readiness Level (TRL) 7 and is available for patent licensing.
Benefits
- Dry, Cryogen-free Operation: Eliminates consumable handling, lowering costs and safety overhead.
- Adjustable Temperature Control: Variable temperature to match mission relevant profiles.
- Endurance-ready Testing: Supports long, continuous cyclic runs for reliable durability data.
- Better Measurement Quality: Optical access enables non-contact strain measurement for accurate results.
- Scalable and Integrable: Modular architecture mates with commercial load frames and expands with program needs.
Applications
- Cryogenic Materials and Durability: Fatigue, fracture, and lifecycle testing for materials used in extreme cold.
- Electronics for Mobility Systems: Low-frequency vibration qualification for components used in rovers and other mobility platforms.
- Mobility Stems and Drivetrain: Evaluation of shock absorbers, wheel materials, springs, and textiles for cold-environment vehicles.
- Textiles: Assessment of fabrics and composites for lunar habitats and EVA suits.
- MRI – Healthcare – new generation of magnets can be tested using this technology.
- Cryogenic Welding
- Quantum Computers
Technology Details
Mechanical and Fluid Systems
LEW-TOPS-197
LEW-20642-1
Patent Pending
https://ntrs.nasa.gov/citations/20260005630
Similar Results
Macroflash (Cup Cryostat)
Advances in new polymers and composites along with growing industrial needs in below-ambient temperature applications have brought about the Macroflash development. Accurate thermal performance information, including effective thermal conductivity data, are needed under relevant end-use conditions. The Macroflash is a practical tool for basic testing of common materials or research evaluation of advanced materials/systems.
The Macroflash can test solids, foams, or powders that are homogeneous or layered in composition. Test specimens are typically 75mm in diameter and 6mm in thickness. The cold side is maintained by liquid nitrogen at 77 K while a heater disk maintains a steady warm-side temperature from ambient up to 373 K. The steady boiloff of the liquid nitrogen provides a direct measure of the heat energy transferred through the thickness of the test specimen. Nitrogen or other gas is supplied to the instrument to establish a stable, moisture-free, ambient pressure environment. Different compression loading levels can also be conveniently applied to the test specimen as needed for accurate, field-representative thermal performance data. The Macroflash is calibrated from approximately 10 mW/m-K to 800 mW/m-K using well-characterized materials.
Cryostat-500
The Cryostat-500 provides laboratory measurement of the steady-state thermal transmission properties of thermal insulation systems under conditions below ambient temperature. Liquid nitrogen is used as a direct measure of the energy going through the test specimen. Thermal insulation systems may be composed of one or more materials that may be homogeneous or non-homogeneous at boundary conditions from 77 K to 373 K and in environments from high vacuum (10E-7 torr) to ambient pressure (10E+3 torr).
The Cryostat-500 provides a much wider range of thermal performance and covers the full range of environmental conditions for applications below ambient temperature. The instrument has been proven through extensive testing of foams, composite panels, multilayer insulation (MLI) systems, aerogel blankets, fiberglass, and many other types of materials. Both the quality and quantity of the thermal performance data for insulation materials and systems have increased even as the process and method has become more time efficient and cost effective. Further guidelines on the test method and equipment for the Cryostat-500 are given in ASTM C1774, Annex A3.
Ultra High-throughput Small Punch Test Machine for Maximum Efficiency
Ultra High-Throughput SPT automates the entire testing process. Here's a simplified breakdown of how it works:
1. Sample Loading: Up to 100 different SPT samples, each with varying thickness or composition, can be placed on a lower sample-holding table.
2. Automated Testing: Once the samples are loaded, the machine takes over with full automation:
• The testing/clamping head assembly moves in three directions to position itself over each SPT sample.
• The clamping applicator descends along the Z' axis, making contact with the sample and applying a specific clamping load.
• The punch, nested within the clamping applicator, moves downward along the Z'' axis to perform the test.
• After completing the test, both the clamping applicator and punch retract, and the head assembly moves to the next SPT sample.
3. Displacement Recording: The machine uses an encoder to track punch movement via a lead screw. An LVDT attached to the punch records displacement closer to the test area.
4. Load Measurement: Separate load cells measure the loads applied by the clamping applicator and the punch.
5. Home Location: The head assembly returns to a designated home location after completing all tests.
6. Data Utilization: The load-displacement data gathered during each test is used to predict the plastic stress-strain response of each respective sample.
Ultra High-Throughput SPT automates the entire SPT testing process offering a hands-off approach similar to overnight additive manufacturing.
Shape Memory Alloy Rock Splitters (SMARS)
Glenn's revolutionary SMARS device is fabricated from nickel-titanium-halfnium (NiTiHf), nickel-titanium-zirconium compositions, or a combination. These compositions contain a secondary, nanometer-sized precipitate phase, which is produced through processes of compositional control and ageing heat treatments. Glenn's novel materials and processes have yielded a SMA composition that produces much higher stresses than other SMAs on the commercial market.
The SMARS device is composed of 1) SMA material as the actuating member; 2) a casing heater placed around the SMA member; 3) a DC or AC power source to provide current through the heater; 4) pointed tips for acute penetration into rock formations; and 5) a hand-press to reset the SMA element after each use. In the rock-splitting process, a hole equal to the diameter of the SMA element is drilled in the portion of the rock where the fracture is desired. Next, the pre-compressed SMA is inserted into the hole, and AC or DC current is applied to energize the devices heaters. Once the heater achieves the critical transformation temperature, the SMA will begin to expand within seconds. Since its expansion is constrained by the rock walls, the SMA will eventually exert up to 1500 MPa of stress, splitting the rock apart. When the current is removed and the heater cools, the SMA material returns to its pre-compressed state. At this point, the material can be recovered, so the process is repeatable after reshaping. The SMA actuating members were also designed to achieve displacement greater than the materials strain output. Glenns SMARS device provides high-powered rock fracturing that is controllable, reliable, and comparatively simple without the use of explosives, hydraulics, or chemicals.
Shape Memory Alloy Mechanisms for CubeSats
Most spacecraft feature release, retention, and deployment devices as key components, because these devices achieve on-demand configurability of solar panels, probes, antennas, scientific instruments, fairings, etc. Until now, designing and using such devices in small spacecraft has been a challenge, because their mass, volume, and power requirements are significant and can impose design constraints. CubeSats, in particular, often need to deploy several structures (such as solar arrays) simultaneously, which prior-art deployment devices have not been able to manage effectively. Glenn's innovation embeds SMAs within the components so the structures can be retained during launch, then released and deployed in orbit. The release and retention device is controlled by an SMA activated pin puller to disengage the release plate from the hooks holding the solar arrays. Once released, the SMA hinge is passively enabled to the deployed state. When ready on orbit, the mechanism is commanded to release and electrical power is sent to the SMA actuator, releasing the component to its deployed state. The component is deployed to its final position through the use of hinges, which are activated passively with SMA spring strips. The retention and release device and hinge are substantially smaller and lighter than deployment mechanisms have ever been and can deploy simultaneously with great reliability. Having already been successfully deployed on a NASA mission, Glenn's innovation is a game-changing technology for CubeSats and other small satellites.



